Black Friday: 50% OFF •

Free worldwide shipping

Arvhi
Buying GuidesMarco Louise

Can a Modular Desk Become a Standing Desk? Fit Check for the Office Table and A1 Desk Unit

Electric sit-stand desk with a monitor arm in an attic home office, with a mesh office chair and a skylight

Not by itself. Our catalog lists one fixed height for each desk, 75.2 cm (29.6 in) for the Office Table and 76.2 cm (30.0 in) for the A1 Desk Unit, and no height-adjustable base. The practical route is a desktop converter that sits on top of the desk, and the question becomes whether its footprint fits. An example 80.0 × 60.0 cm (31.5 × 23.6 in) converter fits on the Office Table, with 15.2 cm of depth to spare, and overhangs the front of the A1 Desk Unit by 9.2 cm.

This is a fit and dimensions guide, not medical or ergonomic advice.

What modular construction does and does not change

Ball-joint frames, drawers and panels describe how a piece is built. They do not make a worktop move up and down. A rebuilt frame at a taller height is still a fixed-height desk, so a modular desk becomes sit-stand only if something on or under it provides the movement.

Step 1: Get the converter’s footprint

Find the converter’s outer width and depth on its spec sheet, and note the depth at its lowest position as well as its highest. Some models swing forward as they rise, so the space they use is larger than the base.

Step 2: Compare it with the desk

DeskWidthDepthHeightWidth left beside an 80 cm converterDepth left behind a 60 cm converter
Office Table175.0 cm (68.9 in)75.2 cm (29.6 in)75.2 cm (29.6 in)95.0 cm (37.4 in)15.2 cm (6.0 in)
A1 Desk Unit127.0 cm (50.0 in)50.8 cm (20.0 in)76.2 cm (30.0 in)47.0 cm (18.5 in)9.2 cm (3.6 in) over
Top view drawn to scale of an example 80 by 60 cm desktop converter on the Office Table, where it fits, and on the A1 Desk Unit, where it overhangs the front edge by 9.2 cm
Top view, drawn to scale. The 80.0 × 60.0 cm footprint is an example, so replace it with your model.

The example size is ours, not a recommendation. On the Office Table it leaves 95.0 cm (37.4 in) of width and 15.2 cm (6.0 in) of depth. On the A1 Desk Unit it leaves 47.0 cm (18.5 in) of width but is 9.2 cm deeper than the desk, so a shallower converter or another desk is needed.

Step 3: Check the clearance above the desk

Measure from the desk surface to the nearest shelf, window sill or wall unit, and compare it with the converter’s highest position plus whatever sits on it. The height of the desk itself, 75.2 or 76.2 cm, is the starting point the converter adds to.

Step 4: Check the weight

Add the converter’s weight to the weight of the monitors and other equipment on it, and compare the total with the converter’s stated capacity. We do not publish a desktop load rating for our desks. The 50 kg (110 lb) per shelf figure belongs to shelves on our storage pieces, not to a desk top.

Step 5: Decide

  • Office Table: an example 80.0 × 60.0 cm converter fits with room to spare. Check your model’s real footprint.
  • A1 Desk Unit: the depth is the limit at 50.8 cm (20 in), so look for a converter shallower than that.
  • Neither desk: a freestanding sit-stand desk is a separate purchase, and its footprint should be measured against the room instead.

Dimensions come from our catalog for the Office Table and the A1 Desk Unit. For two screens on the same desks, see Can a Modular Steel Desk Fit Two Monitors?, and for desk height see Desk Height by Body Height.

Fill-in checklist

MeasureYour number (cm / in)
Converter width
Converter depth, lowest position
Converter depth, highest position
Desk width
Desk depth
Clearance above the desk
Converter weight plus equipment
Converter stated capacity

Frequently asked questions

Can an Arvhi desk be turned into a sit-stand desk?

Our catalog lists one fixed height for each desk, 75.2 cm (29.6 in) for the Office Table and 76.2 cm (30 in) for the A1 Desk Unit, and we do not list a height-adjustable base. A desktop converter that sits on top of the desk is the option to check.

Will a desktop converter fit on the A1 Desk Unit?

It depends on the converter’s footprint. The A1 Desk Unit is 127.0 cm (50 in) wide and 50.8 cm (20 in) deep, so a converter that is deeper than 50.8 cm would overhang the front edge. Compare the converter’s width and depth from its spec sheet with those two numbers.

What measurements decide whether a converter fits?

Four numbers decide it: the converter’s width and depth, the desk’s width and depth, the clearance above the desk, and the combined weight of the converter and what sits on it. Compare the last one with the manufacturer’s limit.

Does a desk have a load rating for a converter?

We do not publish a desktop load rating for our desks. The 50 kg (110 lb) figure applies per shelf on our storage pieces. Check the converter’s weight and its stated capacity against what you plan to put on it.